3M™ Cartridge Roll Mandrel, 45118, 3/16 in x 1-1/2 in x 1/4 in, 25 ea/Case
3M™ Cartridge Roll Mandrel, 45118, 3/16 in x 1-1/2 in x 1/4 in, 25 ea/Case
3M™ Cartridge Roll Mandrel, 45118, 3/16 in x 1-1/2 in x 1/4 in, 25 ea/Case
SKU
#7000045772
Part #: 45118
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ Cartridge Roll Mandrel is a tool attachment that holds an abrasive cartridge roll (sold separately). Together, the mandrel and cartridge roll enable the user to grind or finish hard-to-reach areas of a workpiece, such as angles and curves. The mandrel attaches to a rotary tool such as a die grinder or drill, and comes in different sizes to fit a variety of cartridge roll sizes.
The shank of the mandrel must match the size of the power tool collet or drill chuck, and the pilot diameter must be compatible with the size of the cartridge roll.
Shank of the mandrel is secured into the collet assembly or drill chuck of a rotary power tool
Mandrel enables access to tight spaces with a cartridge roll
Comes in various pilot diameters and lengths to fit different cartridge rolls
Shank must match the size of the power tool collet or drill chuck