Toggle Nav

3M™ Diamond Microfinishing Film Belt 675L, 74 Mic 6MIL, Teal, 2 in x 60 in

3M™ Diamond Microfinishing Film Belt 675L, 74 Mic 6MIL, Teal, 2 in x 60 in

SKU
#7010509022
Part #: 29005
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.

For industrial/occupational use only. Not for consumer sale or use.


3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.


Designed with a strong polyester film backing and sharp diamond mineral, the 3M™ Diamond Microfinishing Film Belt 675L delivers fine finishes on hard metals like thermal spray coating, ceramics, carbides, chilled iron and granite.
More Information
Specification(s)
UPC Code00051119290059
Abrasive MaterialDiamond
Backing MaterialPolyester Film
Backing Thickness (Imperial)6.0 mil
Color FamilyBlue
Micron Grade74 μm
Overall Length (Imperial)60.0 in
Overall Width (Imperial)2.0 in
Product ColorTeal
Product FormBelt
Product Number675L
Country of OriginUSA
Brand3M

High-quality Materials for Micro-finishing

3M™ Diamond Microfinishing Film Belt 675L securely anchors micron-graded diamonds to a polyester film backing. Polyester film backings are water resistant, so the abrasive may be run with a water or oil-based lubricant, which helps wash away unwanted swarf and debris and keeps the abrasive running cool. The belts are also color coded by grade to help you reduce the risk of selecting the wrong grade.

Tips for Achieving Desired Roughness Average

Many Micro-finished products require a specific Ra, or roughness average, when applying to thermal spray coatings, carbides, ceramics, exotic alloys, or other composites. It is important for operators to consider these factors – Ra and substrate – when selecting the grade of film for this belt.


  • Micron-graded diamond mineral delivers close tolerance precision finishes
  • Great for medium stock removal
  • Polyester film backing allows belt to be used dry or wet with water or oil-based lubricants
  • An exceptional film for thermal spray finishing of contour / complex shapes
  • Color coded to reduce the risk of error and mixing up abrasive grades