3M™ Diamond Microfinishing Film Disc 675L, 30 Mic 5MIL, Green, 12 in x NH, Die 1200B
3M™ Diamond Microfinishing Film Disc 675L, 30 Mic 5MIL, Green, 12 in x NH, Die 1200B
3M™ Diamond Microfinishing Film Disc 675L, 30 Mic 5MIL, Green, 12 in x NH, Die 1200B
SKU
#7010533347
Part #: 15565
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
Designed with a durable polyester film backing and diamond mineral, the 3M™ Diamond Microfinishing Film Disc 675L delivers a wide variety of finishes on hard materials like thermal spray coating, ceramics, carbides, chilled iron and granite.
3M™ Diamond Microfinishing Film Disc 675L adheres micron-graded diamonds to a polyester film backing. Polyester film backings are water resistant, so the abrasive may be run with a water or oil-based coolant, which helps remove swarf and generally extends abrasive life. The discs are also color coded by grade to help you reduce the risk of selecting the wrong grade.
Tips for Achieving Desired Roughness Average
Many hard-to-grind materials require a specific Ra, or roughness average, when applying thermal spray coatings, carbides, ceramics, exotic alloys, or other composites. It is important for operators to consider these factors – Ra and substrate – when selecting the grade of film for this disc.
Micron-graded diamond mineral delivers a range of surface finishes and stock removal
Polyester film backing allows disc to be used with coolant
Great flexibility for contoured surfaces
Color coded to reduce the risk of error and mixing up abrasive grades
Finish reduction on a variety of hard to grind materials