For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ Diamond Resin Wheel 694BM is used in the production and sharpening of carbide cutting tools. This general-purpose wheel is designed to give you great form retention and a fast cut-rate when used with water-based lubricants.
Designed for PrecisionThe 3M™ Diamond Resin Wheel 694BM is designed for high-performance grinding on carbide. Specifically, this wheel is designed for the production and sharpening of cutting tools, including end work, gashing and cutting primary and secondary relief edges. Primary relief involves removing material directly behind the cutting edge to enhance chip clearance. For secondary relief, a slight bevel is ground next to the primary relief. End work grinds a small relief angle on the tip of the tool, while gashing adds a slot along the cutting face to allow for chip flow. Each of these processes requires the highest level of quality, which the 3M™ Diamond Resin Wheel 694BM provides.
High-Quality BondingThese superabrasive wheels also use a resin bonding specially designed to resist thermal and chemical deterioration, which can occur during high-speed grinding. This M rated bond provides excellent from retention and long wheel life for precision work on tool metals like carbide. This wheel requires the use of a water-based coolant.
The Right Wheels for the Job3M provides a broad portfolio of superabrasive wheels used for your round tool relief and clearance angle applications. They feature a variety of metal cores, including aluminum, steel, composite and copper, and can be cut with custom arbor holes to fit customer specifications. From short runs and re-sharpening to “lights-out” and long production runs, 3M has the wheel design to meet your needs.
Capable of removing stock or grinding forms on tungsten carbide, cemented carbide and ceramic
Durable resin bond resists deterioration from heat, extending the life of the abrasive wheel
Designed to provide high form retention for applications where holding workpiece tolerance is the priority
Various wheel designs are available for gashing, primary and secondary relief and end work
