3M™ Double Coated Tape 9740, Clear, 48 mm x 55 m, 3.5 mil, 24 Roll/Case

Name: 3M™ Double Coated Tape 9740, Clear, 48 mm x 55 m, 3.5 mil, 24 Roll/Case
Brand: 3M
SKU: 7000029051

SKU

#7000029051

Part #: 31663

Call for Availability

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

3M™ Double Coated Tape 9740 provides a combination of high initial adhesion and good shear holding power to a wide variety of materials, including many plastics and foams. This tape offers excellent continuous performance across a broad range of temperatures. The thin polyester carrier adds dimensional stability and improved handling during slitting and die-cutting operations.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Specifications

More Information
Specification(s)
UPC Code	00051115316630
Adhesive Type	Acrylic
Backing (Carrier) Material	PET
Backing (Carrier) Thickness (Imperial)	0.5 mil
Color Family	Transparent
Face Side Adhesive Type	Acrylic
Maximum Operating Temperature (Fahrenheit)	425.0 Degree Fahrenheit
Overall Length (Imperial)	60.15 yd
Overall Width (Imperial)	1.88 in
Primary Liner	55# Densified Kraft Paper (DK)
Primary Liner Color	White
Product Color	Transparent
Product Number	9740
Total Tape Thickness without Liner (Imperial)	3.5 mil
Country of Origin	USA
Unit of Use - Customary Net Weight	1.193 LBS
Shipping Quantity	24.0
Brand	3M

Product Information

Tape Bonds a Wide Variety of Surfaces

The robust 55 lb. densified kraft paper liner on 3M™ Double Coated Tape 9740 improves handling, protects against humidity and is ideal for die-cutting, automated dispensers and laminating applications. Considered a razor-thin alternative to glue, screws and rivets, double coated tape is often used for foam and gasket attachment in general industrial applications.

Recommended Applications

Attachment to irregular surfaces

Bonding to plastics and metal extrusions

Applications where adhesion to low surface energy substrates is needed

Bonding of decorative trim

High speed flying splices where heat resistance is required

Superior Bonding and Conformability on Irregular Surfaces

Acrylic adhesive offers high adhesion to a wide variety of substrates, including most low surface energy plastics. The adhesive allows for superior bonding and conformability to irregular and flat surfaces. A thin polyester carrier between the adhesive layers improves the handling and strength of 3M™ Double Coated Tape 9740.

Excellent Temperature Resistance

3M™ Double Coated Tape 9740 offers an excellent continuous temperature resistance range from 10°F to 425°F (-12°C to 219°C). The ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.

A Solution for Many Bonding Applications

In general, double coated tape is composed of a paper, film, or tissue carrier that is coated on both sides with pressure sensitive adhesive. The adhesive is protected by a peel-away liner that can be removed at the time of application or left in place until the joining surfaces are ready to be attached. These tapes can be applied by hand or with a dispenser. Double coated tape dispensers are available in a variety of configurations ranging from manual to fully automatic. Applications for double coated tape are found in splicing, construction, fabrication, arts and hobby.

Bringing Better Ideas to the Surface through Science and Innovation

The 3M Industrial Adhesives and Tapes Division applies the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, 3M technologies help customers like you deliver competitive products to the market faster and more efficiently.

Delivers excellent continuous performance across broad temperature range

Acrylic adhesive bonds well to most substrates including most low surface energy plastics

Thin polyester film carrier adds dimensional stability and improved handling during die-cutting

Provides superior bonding and conformability to irregular and flat surfaces

Designed where higher temperature, shear and plasticizer resistance is required

Performance grade splicing tape for corrugators and other high temperature splicing applications