For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ E-A-R™ UltraFit™ Earplugs are made with a triple-flange design to contour to the different shapes and sizes of ear canals to help create a comfortable noise-blocking seal. These earplugs are made of a pliable, soft polymer that can be washed so that the earplugs can be reused, cutting down costs and extending the product life.
The 3M™ E-A-R™ UltraFit™ Silicone Corded Earplug features a “no-roll”, triple-flange design that provides quick, clean, and comfortable hearing protection. Simply hold the stem and push the earplug into the ear. The tip stays clean even if hands are dirty or gloves are worn. The earplug is washable and reusable so it doesn’t need to be replaced as often, reducing waste and lowering costs. Individual plastic carrying cases keep earplugs clean prior to use. Recommended applications include assembly and mechanical, chipping, chiseling, cleaning, drilling, furnace operations, grinding, heavy equipment operations, machining, metal repair, painting, pouring/casting, power fastening, riveting, sanding, sawing and welding. These earplugs are commonly used in the following industries: construction, general manufacturing, mining, oil and gas, and transportation.These earplugs have a Noise Reduction Rating (NRR) of 25 dB and are test compatible with the 3M™ E-A-Rfit™ Validation System. Not only is noise present in our daily routines and recreational activities, but millions of Americans work in hazardous noise on a daily basis. 2015 estimates from the National Institutes of Health suggest that hearing loss afflicts 28 million Americans. About one third of those cases are at least partially attributable to noise. Hearing loss due to noise is almost entirely preventable by judicious use of hearing protection.
Stem helps users insert earplug into their ear canals
No need to touch the ear tips during earplug insertion, helping to keep ear tips clean longer
Soft polymer is washable and reusable
Compatible with the 3M™ E-A-Rfit™ Validation System
Noise reduction rating (NRR)*: 25 dB for standard Ultrafit and 27 dB for Ultrafit 27.
CSA Class AL
*U.S. EPA specifies the NRR as the measure of hearing protector noise reduction. However, 3M makes no warranties as to the suitability of the NRR for this purpose. 3M strongly recommends personal fit testing of hearing protectors. Research suggests that users may receive less noise reduction than indicated by the attenuation label value(s) on the packaging due to variation in fit, fitting skill, and motivation of the user. Refer to applicable regulations or guidance on how to adjust attenuation label values. It is recommended that the NRR be reduced by 50% to better estimate typical protection.
