3M™ Filament-Reinforced Electrical Tape 1139, 1/2 in x 60 yd, 72/Case
3M™ Filament-Reinforced Electrical Tape 1139, 1/2 in x 60 yd, 72/Case
3M™ Filament-Reinforced Electrical Tape 1139, 1/2 in x 60 yd, 72/Case
SKU
#7000132931
Part #: 54166
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ Filament Reinforced Electrical Tape 1139 is a 6.5 mil thick, acrylic adhesive, solvent resistant, electrical tape. This tape is suitable for oil and air filled transfer applications and reinforcements, as well as for holding and separating ground insulation. The tape is 600V rated and withstands a temperature range of 32 to 311 °F (0 to 155 °C).
3M™ Tape 1139 with polyester film/glass filament backing has a pressure sensitive, acrylic adhesive that offers firm adherence. This high break strength tape is designed for applications that require both dielectric strength and mechanical strength. Ideal for bundling motor coils and coil covering. UL Listed and RoHS 2011/65/EU Compliant.
Solvent-resistant, high temperature filament tape with acrylic adhesive
Designed for applications needing both the dielectric strength of polyester film and the high mechanical strength of glass fibers
Low stretch, high tensile and edge-tear resistant
Excellent for anchoring lead wires to banding coils and end-turn taping