Toggle Nav

"3M™ Flexomount™ Plate Mounting Tape 411DL, Gray, 4 1/2 in x 36 yd, 15 mil, 1 Roll/Case"

"3M™ Flexomount™ Plate Mounting Tape 411DL, Gray, 4 1/2 in x 36 yd, 15 mil, 1 Roll/Case"

SKU
#7010334296
Part #: 95420
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.

For industrial/occupational use only. Not for consumer sale or use.


3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.


3M™ Flexomount™ Plate Mounting Tape 411DL is a double linered, double coated tape designed for mounting photopolymer and rubber printing plates to flexographic printing cylinders or sleeves. The adhesive is specially formulated for clean removal from both the plate and the print cylinder or sleeve.
More Information
Specification(s)
UPC Code00051138954208
Adhesive TypeRubber
Air ReleaseNo
ApplicationFlexographic Plate Mounting
Application Thickness (Imperial)15.0 mil
Backing MaterialSolid Vinyl
Color FamilyGray
Composite SleevesYes
Overall Length (Imperial)36.0 yd
Overall Thickness (Imperial)15.0 mil
Overall Width (Imperial)4.5 in
Primary LinerPolycoated Kraft Paper
Primary Liner Thickness (Imperial)4.0 mil
Print QualitySolid Printing
Print Quality (Series)400 Series
Product ColorGray
Product FormRoll
Product Number411DL
Secondary LinerPolyethylene
Secondary Liner Thickness (Imperial)4.0 mil
Total Tape Thickness without Liner (Imperial)15.0 mil
Urethane SleevesYes
Warranty Period1 Year from Date of Manufacture
Country of OriginUSA
Unit of Use - Customary Net Weight5.717 LBS
Shipping Quantity8.0
Brand3M

3M™ Flexomount™ Plate Mounting Tape 411DL features a soft rubber adhesive that offers excellent adhesion to both rubber and photopolymer plates. The high adhesion helps reduce the tendency for plate edge lifting and makes it a good choice for long runs. This gray double coated tape helps provide uniform coverage of solids when halftone dot reproduction is not critical.

Recommended Applications

Mounting photopolymer print plates to flexographic printing cylinders or sleeve systems

Mounting rubber printing plates to flexographic printing cylinders or sleeves

Keep the Presses Running and your Customers Coming Back

For decades, 3M products have been at work in paper mills and printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done. From paper web splicing to plate mounting and packaging the finished job, you can rely on us for solutions and service throughout your operation.


  • Offers excellent adhesion to both rubber and photopolymer plates
  • Double linered version of 411
  • Provides uniform coverage of solids when halftone dot reproduction is not critical
  • Specially formulated for clean removal from plate and print cylinder or sleeve
  • High adhesion helps reduce plate edge lifting