Toggle Nav

3M™ Low-Static Polyimide Film Tape 7419, 610 mm x 33 m, 1 Roll/Case

3M™ Low-Static Polyimide Film Tape 7419, 610 mm x 33 m, 1 Roll/Case

SKU
#7000001316
Part #: 95712
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.

For industrial/occupational use only. Not for consumer sale or use.


3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.


3M™ Low Static, Non Silicone Polyimide Film Tape 7419 with DuPont™ Kapton® polyimide film and acrylic adhesive used for PCB solder masking and other high temperature applications. Low Static.
More Information
Specification(s)
UPC Code00051138957124
Adhesive MaterialAcrylic
Adhesive TypeAcrylic
Backing (Carrier) MaterialPolyimide Film
Overall Length (Imperial)36.09 yd
Overall Width (Imperial)24.016 in
Product ColorAmber
Total Tape Thickness without Liner (Imperial)1.8 mil
Country of OriginUSA
Unit of Use - Customary Net Weight2.144 LBS
Shipping Quantity1.0
Brand3M

Standard Lead Time: 45 Calendar Days


  • Specially formulated acrylic adhesive is resistant to typical solder mask temperatures for short periods of time. Stays firmly in place during processing and removes cleanly from typical electronic substrates even after 10 min @ 500 degree F (260 degree C).
  • Non-silicone adhesive formulation eliminates the potential for silicone contamination which can interfere with subsequent bonding or conformal coating operations.
  • The high temperature acrylic adhesive also has excellent chemical resistance and should be considered for demanding chemical masking applications.
  • Product is wound on a polyethylene tape core