3M™ Microfinishing Film Disc 268L, 8 in x NH, 50 Micron, Unbacksized, Die 800L, 50/Bag, 200 ea/Case
3M™ Microfinishing Film Disc 268L, 8 in x NH, 50 Micron, Unbacksized, Die 800L, 50/Bag, 200 ea/Case
3M™ Microfinishing Film Disc 268L, 8 in x NH, 50 Micron, Unbacksized, Die 800L, 50/Bag, 200 ea/Case
SKU
#7100205966
Part #: 75652
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ Microfinishing Film Disc 268L is a fast-cutting abrasive for precise, uniform, close-tolerance finishes. An aluminum oxide mineral is resin-bonded to a 3 MIL, high-strength polyester film backing for durability. This disc is ideal for defect repair and leveling, paint prep and final finishing.
3M™ Microfinishing Film Disc 268L enables operators to achieve precise, controlled, close-tolerance finishes on surfaces from metals to plastics to wood. This product features precision, micron-graded aluminum oxide, resin-bonded to a high-strength, resilient polyester film backing. Aluminum oxide is desirable among industrial professionals for its fast cut-rate and long life.
Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.
Available in a wide range of grades, these discs are color coded for easy selection of grit and reduced risk of error.
Run Wet or Dry
These film-backed discs are water resistant, so they can be run wet or dry.Coolant generally extends abrasive life, increases cut rate and prevents loading. The high- strength, bare-film backing maintains its strength and flexibility when paper will degrade when run wet. This disc is an excellent choice for sanding plastics, metals, paint, e-coats and wood.
Micron-graded aluminum oxide delivers close tolerance precision finishes
Water-resistant polyester film backing for wet or dry applications
Color coded for ease of selection and reduced risk of error
High-strength polyester film backing resin-bonded for durability