3M™ Mini Mandrel 935, 2-7/8 in x 1/4 in, 5 ea/Case
3M™ Mini Mandrel 935, 2-7/8 in x 1/4 in, 5 ea/Case
3M™ Mini Mandrel 935, 2-7/8 in x 1/4 in, 5 ea/Case
SKU
#7100009221
Part #: 04020
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
The 3M™ Mini Mandrel is designed to work with your die grinder or rotary tool. This accessory grips a 1-inch wide strip of Scotch-Brite™ non-woven material allowing you to access tight internal diameters, typically for surface conditioning or polishing tasks.
Get a Grip
The 3M™ Mini Mandrel is an accessory that attaches to your die grinder or drill. It holds a 1-inch wide strip of Scotch-Brite™ non-woven material. Secure its shaft into the collet assembly of your drill chuck or rotary power tool to clean, polish or deburr the inside diameter of the workpiece.
The 2-7/8-inch long mini mandrel is useful in metal fabrication, woodworking and millwork, in the manufacture of medical instruments, turbine engine manufacture, plumbing, and other industries where finishing internal diameters is necessary.
Grips abrasive allowing you to reach tight internal diameters
Versatile mandrel holds a 1-inch-wide strip of Scotch-Brite™ non-woven material, cut to the length needed for the application
Shank of the mandrel is secured into the collet assembly or drill chuck of a rotary power tool
Shank fits a 1/4 inch power tool collet or drill chuck