3M™ Polyurethane Adhesive Sealant Accelerator AC63, 45 mL Sausage Pack with Manifold, 12/Case
3M™ Polyurethane Adhesive Sealant Accelerator AC63, 45 mL Sausage Pack with Manifold, 12/Case
3M™ Polyurethane Adhesive Sealant Accelerator AC63, 45 mL Sausage Pack with Manifold, 12/Case
SKU
#7100062120
Part #: 99129
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ Polyurethane Adhesive Sealant Accelerator AC63 is a liquid additive that, when combined as a part of a two-component adhesive system, accelerates the curing of the adhesive. It is capable of drastically reducing the handling time of adhesives used in highly productive construction settings.
3M empowers its customers by designing the solutions that bring optimal performance to their everyday applications. 3M™ Polyurethane Adhesive Sealant Accelerator AC63 is designed for large applications where adhesive strength and cure time are factors. When this adhesive accelerator is combined with an adhesive in a two-part adhesive system, it is capable of reaching full strength in a fraction of the time it takes conventional, single-part polyurethane adhesives. Consistent, guaranteed cure rates can be achieved in less than an hour, while a tack-free state can be achieved within 15 (+/-5) minutes.
A Different Kind of Cure
With a curing process unlike that of the single-part polyurethane adhesives on the market, our two-part accelerated polyurethane mixture of 3M™ Polyurethane Adhesive Sealant Accelerator AC63 and 3M™ Polyurethane Adhesive Sealant 550 is capable of curing due to a chemical process as well as a moisture-based process. This process actually cures the adhesive from the inside out, resulting in a more consistent cure that reaches full strength in a fraction of the time. No exothermic reaction takes place, no priming is required (for most applications), and the adhesive mixture does not stain.
Provides a faster cure when mixed in a two-component sealant system
Adhesive mix is tack-free within 15 (+/-5) minutes
Consistent curing can be achieved within 60 minutes
To be used with 3M™ Polyurethane Adhesive Sealant 550 in 350mL Sausage Packs
