Bulk Lids for Added Efficiency with 3M™ PPS™ Excellent for stocking PPS™ Lids efficiently and cost-effectively, 3M™ PPS™ Lids are available in cases containing 25 disposable lids with pre-welded micron filters for straining paint materials. Each case also contains 10 sealing plugs. Lids feature either 125 micron filters, often recommended for water-borne paint materials; or 200 micron filters for traditional solvent-based paint materials. Always reference the paint manufacturer to ensure the recommended filter to strain the paint material. Lids and sealing plugs are designed specifically for the 3M™ Paint Preparation System (PPS™). Lids are sized for the range of 3M™ PPS™ Cups & Collars, allowing technicians to mix graduated measurements of up to 28 fluid oz (850 mL). Correct mixes are best achieved with a weight scale or with a 3M™ PPS™ Mix Ratio Insert (sold separately). Lid sizes include: 3M™ PPS™ Mini & Micro Lids – for use with 3 fluid oz (90 mL) and 6 fluid oz (180mL) PPS™ Cups & Collars, ideal for spot and 1-panel repairs 3M™ PPS™ Midi Lids – for use with 13.5 fluid oz (400mL) PPS™ Cups & Collars, great for 2-panel repairs 3M™ PPS™ Standard and Large Lids – for use with 22 fluid oz (650mL) and 28 fluid oz (850mL) PPS™ Cups & Collars, excellent for 3-panel and 4-panel repairs Advantages of the 3M™ PPS™ System Unlike conventional paint cup systems, 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying. Your Spray Gun Functions at any Angle, Even Upside Down PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees. Clean Up is a Breeze and Uses Less Solvent After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent. A Versatile System that Works with Most Spray Guns Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters also have the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time. Reduces the Chance of Contamination Between Jobs Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. The Bottom Line: Why 3M™ PPS™ is the Paint and Coatings Spray System of Choice 3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.