For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ Prep Solvent-70 effectively removes oils, wax, grease, and silicone from surfaces prior to coating. Use this water-based solvent to clean metal, primed metal and painted surfaces prior to the application of primer and paint.
When there is sticky, oily residue left behind, you need to thoroughly clean it before painting or priming. That's where 3M™ Prep Solvent-70 is needed for prepping surfaces. It is formulated to remove stubborn substances such as oils, wax, grease and silicone. If left on the surface, these substances will quickly degrade the quality of a priming or paint application. That's why even if you cannot visually see residue on the surface, it's a good idea to do a quick cleaning with solvent. You don't want to discover that hard-to-see residue was still left behind after you see the adverse effects it has on primed and painted surfaces.
Important Information
3M™ Prep Solvent-70 is a water-based product and is rated at 65g/L Volatile Organic Compounds. Note: Laws controlling the acceptable amounts of Volatile Organic Compounds (VOC's) vary by state, and in some cases by locality. This product is restricted in one or more places in the U.S. If you are unable to find this product locally, please ask your local distributor for information on local rules products and available alternatives.
A water-based solvent used to remove oil, wax, grease and silicone from surfaces
Solvent effectively cleans metal, primed metal and painted surfaces prior to the application of primer or paint
Rated at less than 70 grams per liter of volatile organic compounds (VOC)
