3M™ Tack Pad 07910, 175 mm x 235 mm, 10/Carton, 60 ea/Case
3M™ Tack Pad 07910, 175 mm x 235 mm, 10/Carton, 60 ea/Case
3M™ Tack Pad 07910, 175 mm x 235 mm, 10/Carton, 60 ea/Case
SKU
#7100193601
Part #: 77319
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
The 3M™ Tack Pad has been developed especially for the automotive aftermarket to remove dirt, lint, dust and sanding particles prior to spraying primers, base coat or clear coat paints. Based on 3M’s non-woven technology, the pad’s tacky surface picks up dust and the three-dimensional web inside absorbs dust particles. Use it on metal, plastic, fiberglass or wood.
Thoroughly Removes Dirt and Dust Without Leaving Drag Marks
To achieve a perfect paint job all loose dirt and dust particles must be removed without leaving surface marks. The 3M™ Tack Pad absorbs dust into the pad as it glides across the surface without leaving any surface marks behind, reducing rework. The conformable pad reaches dust on all surfaces of the workpiece, whether flat, contoured or grooved. It is designed to work with all modern paint systems, including water-based paints, and can even help remove light nibs.
Tacky Fibers Grab Dust From the Workpiece but Won't Leave Hands Sticky
A slightly tacky adhesive is distributed evenly throughout the product so you can use the pad again and again with the same efficient results. This adhesive is engineered to pick up dust without leaving behind any inconvenient adhesive residue on the workpiece or your hands. For even longer life, the adhesive will not dry out, so you get full use of the pad until the adhesive is exhausted.
Optional Pad Dispenser Offers Clean, Ready Access
A wall mountable 3M™ Tack Pad Dispenser (sold separately) keeps the pads free from contamination and makes them readily accessible.
When thorough surface preparation is essential, finish off with a 3M™ Tack Pad for best results.
Tacky pad thoroughly removes surface dust particles to provide a perfectly clean surface prior to paint or primer
Three-dimensional design draws dust into the pad for total dust collection without leaving drag marks behind
Conformable pad gets into grooves and contours of the workpiece for complete coverage
Specialized coating reduces adhesive transfer to hands or workpiece
