For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ Trizact™ Hookit™ Clear Coat Sanding Abrasive Discs are ideal for removing defects in the paint, such as dust nibs and matching orange peel. They're used prior to paint finishing abrasives or traditional buffing compounds and pads. These film-backed discs are used damp to help prevent loading and the curly-Qs and pig tails that dry sanding discs can leave behind.
Prepare clear coat surfaces for finishing with 1500 grade 3M™ Trizact™ Clear Coat Sanding Discs. These film-backed discs are designed for damp sanding to remove paint defects and refine sanding scratches prior to buffing or using 3000-grade 3M™ Trizact™ paint finishing abrasives.
These durable discs have a film backing that resists tearing and flexes over uneven surfaces. Discs are used damp to maintain a clean surface and maximize disc life.
Used before any 3M™ Perfect-It™ Paint Finishing system or traditional buffing process.
Level dirt nibs and refine sand scratches with fewer deep-scratch defects than dry sanding abrasives with 3M™ Trizact™ Clear Coat Sanding Discs P1500.
RECOMMENDED APPLICATIONS: This disc is made for leveling dust nibs and sanding out mismatched orange peel on all automotive and industrial paints, as well as clearcoats
PROFESSIONAL FINISHES: The P1500 grit enables smooth, fine finishes
EXPERIENCE THE 3M™ TRIZACT™ DIFFERENCE: The 3M™ Trizact™ 3-dimensional mineral abrasive structures are uniformly distributed with multiple layers, meaning that as the structures wear, fresh, sharp mineral is exposed to keep the results consistent
FAST AND EASY DISC CHANGEOVERS: Utilizes a hook and loop-style Hookit™ backing that firmly connects the disc while eliminating the dust and debris contamination that adhesive-backed abrasives can suffer from
Hookit™ attachment system allows for fast, easy changeouts with Hookit™ abrasive discs, disc pads, and soft interface pads.
These P1500 grade discs are available in 3-inch, 5-inch and 6-inch diameters.