Toggle Nav

3M™ Weld-Thru Coating II, 05917, 12.75 oz Net Wt/361 g, 6 per case

3M™ Weld-Thru Coating II, 05917, 12.75 oz Net Wt/361 g, 6 per case

SKU
#7000000638
Part #: 5917
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.

For industrial/occupational use only. Not for consumer sale or use.


3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.


3M™ Weld-Thru II is a convenient aerosol coating designed to prevent corrosion between welded metal surfaces. Featuring a zinc base that draws corrosion away from bare metals, it helps prevent costly comebacks due to corrosion at welds. Spray coating applies fast, resists weld spatter common to some weldable primers and dries in as little as 5 minutes, increasing shop efficiency and productivity.
More Information
Specification(s)
Part number05917
UPC Code00051131059177
ApplicationSurface Coatings, Welding, Paint Protection, Anti-Corrosion, Manual Spray Coating
Color FamilyGray
ConsistencyAerosol
Product ColorGray
Product Key5917 5917 WELDING&SPARK DEFLECTION PAPER 36 BWN
Product TypeWeld-thru Coating
TextureMedium
Volume (Imperial)12.748 fl oz
Country of OriginUSA
Shipping Quantity6.0
Brand3M
no_image
Safety Data Sheets (PDF , 0B)

3M™ Weld-Thru II is a convenient aerosol coating designed to prevent corrosion between welded metal surfaces. Featuring a zinc base that draws corrosion away from bare metals, it helps prevent costly comebacks due to corrosion at welds. Spray coating applies fast, resists weld spatter common to some weldable primers, and dries in as little as 5 minutes, increasing shop efficiency and productivity. Its zinc base, aerosol delivery, and ability to minimize splatter make 3M™ Weld-Thru II an excellent choice for protecting welded surfaces, and your shop.


  • PREVENTS COSTLY COMEBACKS: Protects bare metal panels and parts from corrosion after welding
  • ZINC BASE: Draws away contact corrosion, leaving substrates strong
  • CONVENIENT AEROSOL SPRAY: Applies fast to increasing shop efficiency and productivity
  • QUICK DRYING: Dries in as little as 5 minutes before MIG welding for efficient throughput
  • MINIMUM WELD SPATTER: Special formulation helps prevent shop damage