3M™ Microfinishing Film Belt 272L, 30 Mic 5MIL, Type UK, 2 in x 72 in

Name: 3M™ Microfinishing Film Belt 272L, 30 Mic 5MIL, Type UK, 2 in x 72 in
Brand: 3M
SKU: 7010509224

SKU

#7010509224

Part #: 37655

Call for Availability

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

3M™ Microfinishing Film Belt 272L was designed to deliver close tolerance precision finishes on a versatile range of substrates – from gelcoat and soft rubber to fiberglass and metals.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Specifications

More Information
Specification(s)
UPC Code	00051119376555
Abrasive Material	Aluminum Oxide
Backing Material	Film
Backing Thickness (Imperial)	5.0 mil
Coat Type	Closed Coat
Color Family	Green
Micron Grade	30 μm
Overall Length (Imperial)	72.0 in
Overall Width (Imperial)	2.0 in
Product Color	Green
Product Form	Belt
Product Number	272L
Country of Origin	GBR
Brand	3M

Product Information

Aluminum Oxide Mineral

3M™ Microfinishing Film Belt 272L is designed by anchoring aluminum oxide mineral to a polyester film backing with resin. This belt is uniquely suited to help with sheet polishing, finishing, and flat finishing.

Aluminum oxide mineral is interspersed on this abrasive belt, as it is a popular choice among industrial professionals who favor the fast cut rate and long life. Aluminum oxide's hardness, strength and low heat retention help the belt withstand the repeated wear that grinding and finishing often demand.

Features a Water-Resistant Polyester Backing

The polyester film backing on 3M™ Microfinishing Film Belt 272L is water resistant, so the belt can be run wet or dry. By applying a lubricant, like water, as the abrasive runs, operators may be able to wash away swarf and debris that tend to clog the abrasive or warp and discolor the substrate. The resin bond that fastens aluminum oxide to the backing helps the abrasive stay cool, because it breaks down gradually as the belt rotates.

Available in a Range of Grades

Given that it's available in a versatile range of grades – from 9 to 100 micron – operators can select the right grade of 3M™ Microfinishing Film Belt 272L for their unique application. Higher grades, like 100 micron, are good for higher removal processes, while lower grades, like 9, are good for final, fine finishes.

Altogether, this film-backed belt enables operators to quickly d achieve desired Ra (roughness average) and other surface finish parameters. These are some of the reasons why this belt is used across industries – from metalworking to woodworking.

Durable 5 mil film backing won’t deflect when run, so it can stand up to contours

Micron graded aluminum oxide mineral cuts sharp but won’t gouge or mar the substrate

Features a closed coat construction for finish consistency

Excellent choice for applications requiring fine finishes

Available in a versatile range of grades, so operators can select the right grade for their application