3M™ Trizact™ Film Belt 272LA, A35, Green, 4 in x 106 in
3M™ Trizact™ Film Belt 272LA, A35, Green, 4 in x 106 in
3M™ Trizact™ Film Belt 272LA, A35, Green, 4 in x 106 in
SKU
#7010508961
Part #: 20733
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ Trizact™ Film Belts 272LA are ideal for repairing defects on glass and finishing Corian and acrylic solid surfaces. Very few processing steps are necessary to achieve high gloss and level surfaces. Uniquely structured abrasive mineral continues to stay sharp and deliver consistently outstanding results.
3M™ Trizact™ Film Belts are coated with a uniquely structured aluminum oxide mineral on a resilient film backing. Microreplication – a proprietary 3M technology – produces abrasives that start sharp and stay sharp, delivering more consistent cut and finish over their lifetime. The aluminum oxide mineral is contained in pyramid-like microreplicated feaures evenly distributed across a backing in a precise pattern. As the peaks of these structures wear away, fresh cutting mineral is exposed, ensuring a fast, consistent cut rate.
Greater Productivity, More Desirable Finishes
Unlike conventional abrasives, which are constructed from randomly-spaced and irregularly shaped minerals, the uniform configuration of Trizact™ abrasives helps deliver more consistent, predictable finishes, higher, more even rates of cut, cooler grinding and finishing temperatures, and ultimately, fewer processing steps for greater productivity.
The unique construction of Trizact abrasives requires a different grading system. Grade is defined by the average particle size in microns and begins with an "A." Lower is finer. The 3M™ Trizact™ narrow film belt is available in A5, A10 and A35 micron grades and widths up to 26 inches.
Fresh cutting surfaces on abrasive mineral are continually exposed by wear, resulting in extended belt life, reducing frequency of belt changes
Fewer processing steps means you save production time
Microreplicated abrasive delivers precise, repeatable finishes and higher gloss level
