3M™ Hookit™ Microfinishing Film Disc 468L, 100 Mic 3MIL, Type E, 5 in x NH, Die 500X
3M™ Hookit™ Microfinishing Film Disc 468L, 100 Mic 3MIL, Type E, 5 in x NH, Die 500X
3M™ Hookit™ Microfinishing Film Disc 468L, 100 Mic 3MIL, Type E, 5 in x NH, Die 500X
SKU
#7010533473
Part #: 33864
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ Hookit™ Microfinishing Film Disc 468L is ideal for sanding and finishing on plastics, wood, paint, e-coat composites, and metals.
3M designed the 3M™ Hookit™ Microfinishing Film Disc 468L with a hook and loop attachment system for sanding and finishing. It is intended to speed up disc swapping during multi-step sequences, thereby increasing productivity and throughput.
3M™ Hookit™ Attachment
3M offers a complete line of hook-and-loop style 3M™ Hookit™ discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit™ sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately), can be removed cleanly and easily, and can be re-used again and again for the extent of the abrasive life. The backup pad typically attaches to a tool like a random orbital sander (also sold separately).
Silicon Carbide and Polyester Backing
The 3M™ Hookit™ Microfinishing Film Disc 468L is engineered using micron-graded silicon carbide, which is a popular choice among industrial professionals because of its fast cut and smooth finish. Silicon carbide is a mineral that is very sharp and commonly used for low-pressure applications, such as sanding and finishing during paint prep. While it breaks down faster than aluminum oxide, this mineral produces a brighter finish and offers greater tear-resistance than comparable paper products, making it ideal for high-production environments.
Silicon carbide mineral is fast-cutting and produces a smooth finish
Ideal for sanding plastics, wood, paint, e-coat composites, and metals
Strong polyester film backing enhances abrasive durability
Available in a range of grades
Hookit™ attachment for easy change out of discs during multi-step sequences
