3M™ Microfinishing Film Disc 372L, 60 Mic 5MIL, 12 in x 1 in, Die 1200J
3M™ Microfinishing Film Disc 372L, 60 Mic 5MIL, 12 in x 1 in, Die 1200J
3M™ Microfinishing Film Disc 372L, 60 Mic 5MIL, 12 in x 1 in, Die 1200J
SKU
#7010509727
Part #: 84917
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ Microfinishing Film Disc 372L is a fast cutting abrasive for precise, uniform, close-tolerance finish. A high friction coating on a strong, flexible 5 mil polyester film backing for use on metal and plastic surfaces, or for paint spot repair.
Available in fine micron-graded aluminum oxide, 3M™ Microfinishing Film Disc 372L features a flexible, film backing with a high-friction coating for better grip during use. This disc is available in varying diameters and center hole sizes. A polyester film backing is typically stronger than paper backings and more conformable to part profiles. It is waterproof so can be used in wet applications.
Fine Finishing, Powertrain Microfinishing, Superfinishing Performer
Microfinishing – an important application for many operators – corrects the geometry of parts and creates fine finishes. Microfinishing can remove damaged or amorphous layers to improve the surface finish and roundness of the part. Operators should consider finish and stock removal requirements when selecting the right microfinishing film.
Micron-graded aluminum oxide abrasive mineral provides precise, uniform, close-tolerance finishes
High friction coating on film backing (backsize) to prevent slipping
Ideal for metal, plastic finishing, and paint spot repair
Wide grade range for varying finish and stock removal requirements