3M™ Aluminum Oxide Sandpaper Fine, 9001NA, 9 in x 11 in, 5/pk
3M™ Aluminum Oxide Sandpaper Fine, 9001NA, 9 in x 11 in, 5/pk
3M™ Aluminum Oxide Sandpaper Fine, 9001NA, 9 in x 11 in, 5/pk
SKU
#7100140811
Part #: 9001
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ Aluminum Oxide Sandpaper is used for general purpose sanding on paint, wood and metal. Be sure to sand with the grain of the wood and always work through a sequence of grits, from coarse to very fine. This sandpaper is made with aluminum oxide mineral.
3M™ Aluminum Oxide Sandpaper 9001NA, 9 in x 11 in Fine. 3M™ sandpaper comes in a variety of minerals and a wide grit range. This fine grit aluminum oxide sandpaper is a general purpose abrasive that can be used on painted surfaces, bare wood, and metal. The 9 in x 11 in sheets can be cut to size to use by hand, on a sanding block, or a power tool sander. Sanding is an integral step in preparing a surface to receive a coating. For the best sanding results, sand with the grain of the wood and work through a sequence of grits, from coarse to very fine.
Use it by hand, on a sanding block, or cut it to size for a power tool sander