3M™ Cloth Roll 340D, 60 X-weight, 4 in x 50 yd, ASO, Single-flex
3M™ Cloth Roll 340D, 60 X-weight, 4 in x 50 yd, ASO, Single-flex
3M™ Cloth Roll 340D, 60 X-weight, 4 in x 50 yd, ASO, Single-flex
SKU
#7010532841
Part #: 29479
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ Cloth Roll 340D is an abrasive sanding roll constructed on a flexible, X-weight cloth backing that features open coat construction for greater load resistance. The aluminum oxide abrasive and flexible backing make this roll an ideal product for dry applications such as surface dimensioning and defect removal.
The 3M™ Cloth Roll 340D is best suited for metal and wood sanding and finishing thanks to its durability and fast cutting abrasive material. With a flexible mix of polyester and cotton, this x-weight cloth backing provides smooth operation and durability and can conform to the shape of contoured parts for consistent finishing. The abrasive side features an open coat of aluminum oxide grains that self-fracture and stay sharp to provide a fast cut and a fine finish.
Aluminum Oxide Abrasive
Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut-rate, hardness, and strength, it is widely used for sanding and finishing applications. Aluminum oxide is suitable for use on a wide variety of materials in metal and woodworking.
Heat and Load Resistant
This roll also uses a resin bonding which is specially designed to resist thermal and chemical deterioration, which can occur during sanding. This bond is very tough and excellent for precision work on hard and soft wood. This also allows for faster sanding and a higher cut rate. Open coat construction means the abrasive grains are placed with space between them to help evacuate sawdust and other sanding debris and avoid clogging the cutting edge of the grains. This allows the abrasive mineral to continue cutting even when sanding materials that would otherwise clog the grain and hinder sanding ability.
Flexible x-weight cloth backing offers excellent flexibility in sanding applications
Aluminum Oxide abrasive cuts fast and provides a consistent, fine finish
Resin bonding resists deterioration from heat, extending the life of the abrasive cloth
Flexible cotton cloth conforms to contoured parts for consistent finishing
