3M™ Cubitron™ II Hookit™ Film Sheet 775L, 80+, 2-3/4 in x 16-1/2 in
3M™ Cubitron™ II Hookit™ Film Sheet 775L, 80+, 2-3/4 in x 16-1/2 in
3M™ Cubitron™ II Hookit™ Film Sheet 775L, 80+, 2-3/4 in x 16-1/2 in
SKU
#7010508635
Part #: 27322
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ Cubitron™ II Hookit™ Film Sheet 775L features 3M Precision Shaped Ceramic Grain, a revolutionary advancement in abrasive technology. The triangular shaped ceramic mineral is designed to slice through the substrate, rather than gouging or “plowing” like conventional abrasives, resulting in an abrasive that cuts up to 2x as fast and lasts up to 6x as long as conventional abrasives.
3M™ Cubitron™ II Hookit™ Film Sheet 775L is ideal for a broad range of applications focused primarily on stock removal, because the 3M Precision Shaped Ceramic Grain aggressively rids the workpiece of burrs. This sheet may be used on a wide variety of substrates, including metals, composites, gelcoat, and whitewood. For additional durability and edge retention, the film backing offers great tear resistance. Abrasive grain is adhered to the backing in an open-coat construction, which means the grains are spaced apart from each other. These spaces permit debris to escape, which can be especially helpful on work surfaces that tend to clog or load a coated abrasive.
Engineered to Help You Do More
3M precision-shaped grains have sharp peaks that easily "slice" through metal. They stay cool, cut fast and last long. Conventional ceramic abrasive grain tends to "plow" through the metal, causing heat to build up in the workpiece and the abrasive — resulting in a slower cut, shorter disc life and undesirable effects, such as brushing. 3M engineered this grain to deliver consistent results, part after part.
Combining Durability and Efficiency
3M™ Cubitron™ II Hookit™ Film Sheet 775L features a Hookit™ backing, which is a great match for work spaces where adhesive-backed abrasives may become contaminated by dust or dirt. Hookit™ abrasives can be removed cleanly and easily from the backup pad and can be re-used again and again for the extent of the abrasive life.
Revolutionary 3M Precision Shaped Grain technology provides fast cut and long life
Cuts up to 2x as fast as conventional abrasives
Lasts up to 6x as long as conventional abrasives
Film backing for greater tear resistance and edge retention
Ideal for a wide variety of substrates and applications focused primarily on stock removal
Hookit™ backing for easy attachment to power tools
