Scotch-Brite™ Cut and Polish Roll, CP-RL, A/O Medium, 2 in x 30 ft, 6 ea/Case
Scotch-Brite™ Cut and Polish Roll, CP-RL, A/O Medium, 2 in x 30 ft, 6 ea/Case
Scotch-Brite™ Cut and Polish Roll, CP-RL, A/O Medium, 2 in x 30 ft, 6 ea/Case
SKU
#7100141895
Part #: 5206
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
Scotch-Brite™ Cut and Polish Roll comes with a tough, tight and dense web that allows aggressive blending, cleaning and deburring of metals. Typical applications include metalworking, paint prep, as well as coating and corrosion removal. The web is conformable, flexible and will adapt to unique contours and get into hard-to-reach locations. Tough nylon backing provides durability and long life.
The Scotch-Brite™ Cut and Polish Roll can be used by hand or machines such as dual pad rubbing machines, oscillating machines. The roll can be cut and fit to our Mini Mandrel #935 to deburr, clean and polish inside diameters. Scotch-Brite Cut and Polish Roll is also an effective alternative to leather straps or canvass for stropping and other bench applications. The roll cuts easily, allowing for customized lengths.
This tan cut and polish roll uses aluminum oxide abrasive, which is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.
Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
Tight and dense construction allows for aggressive blending, cleaning, and polishing on metal surfaces
Conformable and flexible for getting into hard-to-reach spots
Multiple widths fulfill a variety of surface conditioning needs
Can be cut to any length to fulfill an extensive variety of tasks by hand or fit to machines
Replaces leather or canvas straps for stropping and other bench applications
