Scotch-Brite™ Cut and Polish Sheet, 6 in x 9 in A VFN, 50 ea/Case
Scotch-Brite™ Cut and Polish Sheet, 6 in x 9 in A VFN, 50 ea/Case
Scotch-Brite™ Cut and Polish Sheet, 6 in x 9 in A VFN, 50 ea/Case
SKU
#7010365805
Part #: 14046
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
The Scotch-Brite™ Cut and Polish Sheet features a tough, tight and dense web that allows aggressive blending, cleaning and deburring of metals. The web is conformable, flexible and will adapt to unique contours and get into hard-to-reach locations. May be used manually or on an in-line sander for metalworking, paint prep or coating and corrosion removal.
The Scotch-Brite™ Cut and Polish Sheet is made to be your go-to choice for aggressive blending and finishing. When used by hand this sheet can easily clean and polish inside diameters, and can take on tougher jobs when attached to an inline-sander.
Aluminum Oxide Abrasive
This tan colored cut and polish sheet uses aluminum oxide abrasive, which is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.
The Scotch-Brite™ Advantage
Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
Dense construction allows for aggressive blending, cleaning, and polishing on metal surfaces
Load resistant design assures consistent action across the sheet
Conformable and soft to meet every part of a metal surface evenly
Flexible for getting into hard-to-reach spots
Extremely durable material provides a long lifespan for the sheet
