For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
For defect repair and scratch removal, 3M™ Glass Polishing Compound is a high quality, one-step solution for assorted glass surfaces and parts. This bottled liquid compound uses a cerium oxide mineral blend, which assures a great cut and the highest level of polish possible.
Polishing marring and fine scratches out of glass surfaces is a slow and difficult process, but using 3M™ Glass Polishing Compound can make the job a little bit easier. When used with a dual action or rotary machine polisher, it not only cuts well, but also breaks down quickly to leave a high clarity finish that requires no further refinement. This makes the compound easy to use and requires almost no clean-up.
Simple Ingredients for a Great Finish
3M™ Glass Polishing Compound comprises a precision-milled cerium oxide-based micro-abrasive paste that permanently removes defects such as swirl marks, fine scratches and water spots from exterior glass surfaces. The use of cerium-oxide offers distinct advantages in terms of finish quality and work time and avoids the use of wax or silicone chemicals that can be less user friendly. It also contains no chemical cleaners, fillers or glazing oils, which makes it great for both casual and professional users.
High Efficiency Compound
This high-efficiency compound requires only 2-4 drops for every square foot of glass surface area, and requires little or no cleanup. The 3M™ Glass Polishing Compound gives you a professional looking finish without the need for professional level expertise.
EASY TO USE: When used with a dual action or rotary machine polisher, it no only cuts well, but also breaks down quickly to leave a high clarity finish that requires no further refinement
HIGH EFFICENCY COMPOUND: Requires only 2-4 drops for every square foot of glass surface area and requires little or no cleanup
SIMPLE INGREDIENTS: Precision-milled cerium oxide-based micro-abrasive paste permanently removes defects such as swirl marks, fine scratches and water spots from exterior glass surfaces
DISTINCT ADVANTAGES: The use of cerium-oxide offers distinct advantages in terms of finish quality and work time and avoids the use of wax or silicone chemicals that can be less user friendly
For industrial/occupational use only. Not for consumer sale or use
