Scotch-Brite™ Blending Hand Pad 7446, HP-HP, SiC Medium, Gray, 6 in x 9 in, 20/Pac, 40 ea/Case
Scotch-Brite™ Blending Hand Pad 7446, HP-HP, SiC Medium, Gray, 6 in x 9 in, 20/Pac, 40 ea/Case
Scotch-Brite™ Blending Hand Pad 7446, HP-HP, SiC Medium, Gray, 6 in x 9 in, 20/Pac, 40 ea/Case
SKU
#7100082599
Part #: 65056
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
Scotch-Brite™ Blending Hand Pad 7446 uses an open, aggressive web for effective hand blending, general purpose cleaning, prep work, and finishing. The conformable material adapts to both flat and irregular contours without significantly altering the dimensions of base material. Unlike steel wool, the Blending Hand Pad won’t shred during use, rust after use, or leave fine metal splinters.
Scotch-Brite™ Blending Hand Pad 7446 uses an open, aggressive web for effective hand blending, general purpose cleaning, prep work and finishing. The conformable material adapts to both flat and irregular contours without significantly altering the dimensions of base material. Unlike steel wool, the Blending Hand Pad won’t shred during use, rust after use, or leave fine metal splinters.
The Scotch-Brite™ Blending Hand Pad combines load resistance and uniform wear to provide a consistent cut-rate throughout the life of the hand pad. The 6 x 9” Blending Hand Pad can be used by hand for precise control, with a hand pad holder for uniform finishing, or on an inline sander to cover larger areas.
This gray hand pad is filled with silicon carbide abrasive mineral, a mineral that is very sharp and commonly used for low-pressure applications. While it breaks down faster than aluminum oxide, it produces a superior finish.
Recommended applications include finishing and blending.
LOAD RESISTANCE AND UNIFORM WEAR: Use for blending and finishing stainless steel and aluminum
CONFORMABLE MATERIAL ADAPTS TO BOTH FLAT AND IRREGULAR SURFACES: Thick, lofty hand pad material blends scratches on irregular surfaces leaving a uniform finish
WORKS CLEAN FOR A SUPERIOR FINISH: Provides similar performance as steel wool grade 3 without shredding, rusting, or splintering
OPEN, AGGRESSIVE WEB: Nonwoven construction and abrasive mineral provide consistent cutting over the life of the reusable pad
FITS WELL FOR HAND USE: Material construction allows for comfortable fit and hold for use on multiple metal surface types