3M™ Adhesion Promoter K540NTUV, 1 gal Can, 4 Can/Case

Name: 3M™ Adhesion Promoter K540NTUV, 1 gal Can, 4 Can/Case
Brand: 3M
SKU: 7100074884

SKU

#7100074884

Part #: 54448

Call for Availability

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

3M™ Adhesion Promoter K540NTUV is a non-toluene, liquid primer used for enhancing the adhesion of 3M™ Acrylic Foam and 3M™ Acrylic Plus Tapes in automotive applications. Our formula may be used for polyolefin-based materials such as polypropylene (PP), thermoplastic olefins (TPO) and ethylene propylene diene monomer (EPDM).

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Specifications

More Information
Specification(s)
UPC Code	00051115544484
Application	Promoting adhesion of tape when attaching badges
Color Family	Yellow
Composition	Solvent Based
Container Size (Imperial)	1.0 gal
Container Type	Can
Contains UV Dye	Yes
Dry Time	30 sec - 90 sec
Manufacturing Segment	Exterior
Product Color	Yellow
Product Number	K540NTUV
Product Type	Adhesion Promoter
Solids Level	Approximately 3%
Substrate	EPDM Rubber
Surface Type	Plastic
Volume (Imperial)	1.0 gal
Country of Origin	JAPAN
Shipping Quantity	4.0
Brand	3M

Safety/Compliance

3M™ Adhesion Promoter K540NTUV, 1 gal Can, 4 Can/Case

Safety Data Sheets (PDF , 0B)

Product Information

Strong Adhesion with Reduced Hazardous Air Pollutant Content

3M™ Adhesion Promoter K540NTUV is a liquid primer used to improve the adhesion of 3M™ Acrylic Foam and Acrylic Plus Tapes to polyolefin-based materials such as polypropylene, TPO and EPDM. A fluorescent dye has been added so that primer coverage can be verified. Since formulations and surface energies vary for these materials, each application should be verified through testing. 3M™ Adhesion Promoter K540NTUV is specifically formulated to be used with 3M Acrylic Foam and Acrylic Plus Tapes for automotive applications. 3M™ Adhesion Promoter K540NTUV has also been formulated to achieve a significant reduction in hazardous air pollutant (HAPS) content as compared to 3M™ Adhesion Promoter K520UV.

Recommended Applications

TPO

EPDM

Better Science for Better Adhesion from 3M

Since 1925 when a 3M lab assistant invented masking tape, 3M has been applying science to life –developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations and all of it goes into each 3M product developed for automotive OEM, like 3M™ Adhesion Promoter K540NTUV.

Helps ensure secure attachment tape to automotive parts

Intended for use with EPDM, PP and TPO

Ready to use with common application equipment

Formulated specifically for use with 3M™ Acrylic Foam and 3M™ Acrylic Plus Tapes

Premixed with a UV dye