Toggle Nav

3M™ Tape Primer 94, Light Yellow, 1/2 Pint, 12 Each/Case

3M™ Tape Primer 94, Light Yellow, 1/2 Pint, 12 Each/Case

SKU
#7100003278
Part #: 23926
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.

For industrial/occupational use only. Not for consumer sale or use.


3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.


3M™ Tape Primer 94 can be used to improve the overall adhesion of tape, film and vinyl graphics to polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces.
More Information
Specification(s)
UPC Code00021200239267
Adhesive TypeGeneral Purpose Acrylic Adhesive
ApplicationWall & Door Panel Attachment, Exterior Side Panel Bonding
Application Temperature-Environment60°F-80°F
Clean-upAcetone Solvent
Color FamilyYellow
CompositionSolvent Based
Full Cure Time2 min
Net Weight (Imperial)0.59 lb
Overall Height (Imperial)2.88 in
Overall Length (Imperial)2.88 in
Physical FormLiquid
Product FormCan
Product Key94
Product Number94
Product TypePrimer
Storage Temperature (Fahrenheit)60°F - 80°F
Surface TypePlastic
Volume (Imperial)0.5 pt
Country of OriginUSA
Shipping Quantity12.0
Brand3M
no_image
Safety Data Sheets (PDF , 0B)

Dries in Minutes for Efficient Use

Make sure your surface is clean and dry before applying a thin, uniform coat of 3M™ Tape Primer 94. The primed surface must remain free from contaminants prior to applying the tape. It's important to use the minimum amount of product necessary as over applying can cause sub-optimal results. Allow the primer to dry completely, which is usually accomplished in 5 minutes at room temperature, before applying tape. Special note: porous surfaces may require 2 applications for uniform coverage and good adhesion. Allow your first application of primer to dry before applying a second coat.

Recommended Applications

Promote adhesion of 3M™ VHB™ Tape

For use on many plastic, rubber, painted and bare metal substrates

Application Tips

3M™ Tape Primer 94 may be applied with a brush, swab, pressurized flow gun, knurled roller or similar type of equipment and can be removed with isopropyl alcohol. Vigorous scrubbing may be required.


  • Promotes adhesion to polyethylene, polypropylene, ABS, PET/PBT blends and other on difficult to stick to substrates
  • Commonly used for increasing adhesion of film and vinyl graphics in automotive detailing
  • Can be applied with brush or swab for small areas and a pressurized flow gun for larger areas
  • Dries to a clear finish
  • Cleans up with isopropyl alcohol