Toggle Nav

3M™ Chemical Sorbent Roll C-RL38150DD, High Capacity, 38 in x 150 ft, 1 Each/Case

3M™ Chemical Sorbent Roll C-RL38150DD, High Capacity, 38 in x 150 ft, 1 Each/Case

SKU
#7100003517
Part #: 29098
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.

For industrial/occupational use only. Not for consumer sale or use.


3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.


Chemical sorbent roll can be easily cut to cover small areas or fit tight corners. Rolls of sorbent material are used for large spill management or in areas where spills may occur. May be used to cover bench tops in prep for a spill or as a work surface.
More Information
Specification(s)
UPC Code00051138290986
Absorption Capacity (Imperial)89.4 Gal. (US)
ApplicationWorkplace Safety
Color FamilyYellow
FeaturesHigh Capacity
MaterialPolyester
Overall Length (Imperial)150.0 ft
Overall Width (Imperial)38.0 in
Product ColorYellow
Product FormRoll
Product NumberC-RL38150DD
Recommended IndustryMilitary
Spill AreaLaboratories
Spill TypeWater-Soluble Oils
Country of OriginUSA
Unit of Use - Customary Net Weight20.6 LBS
Shipping Quantity1.0
Brand3M

High capacity sorbents have a scrim on one side to increase strength and help eliminate linting. Rolls of sorbent material are used to cover and sorb large spills or in areas where spills may occur. They can be cut to the desired length and are the most economical way to purchase sorbent.

Each roll is 38 inches X 150 feet (76 gallons/roll).


  • For use on most aggressive (hazardous) and non-aggressive liquids.
  • Scrim on one side increases strength and helps eliminate linting.
  • Rolls may be cut to cover small areas or large surfaces.
  • Uniform resin coating throughout the web delivers high performance over the life of the pad
  • Can also be used with a swing machine for spray buffing and cleaning