Mold Killing Primer, Interior/Exterior, Flat White, 1 gal Bucket/Pail, 2/Carton
Mold Killing Primer, Interior/Exterior, Flat White, 1 gal Bucket/Pail, 2/Carton
- Paint directly over mold, mildew and stains.
- Kills existing mold, mildew and odor-causing bacteria.
- Protective, water-based formula for interior and exterior use.
- Binds to chalky siding, masonry, metal, plaster and more.
- Ideal for residential, commercial and industrial environments.
- For extensive stains, pair with a Zinsser stain-blocking primer.
| Specification(s) | |
|---|---|
| Paint Sub-Category | Primer, Water-Based |
| Global Product Type | Building/Construction Paints & Primers |
| Intended Application Environment | Interior/Exterior |
| Finish/Sheen | Flat |
| Color(s) | White |
| Color Family | White |
| Number of Colors | 1 |
| Volume Capacity | 1 gal |
| Packaging Type | Bucket/Pail |
| Binder/Vehicle Ingredient(s) | Styrene Acrylic |
| Diluent/Solvent Ingredient(s) | Ethylene Glycol, Water |
| Pigment/Dye/Filler Ingredient(s) | Calcium Carbonate |
| Application Method | Brush, Roller |
| Recommended Level of Ventilation | Moderate |
| Application Temperature Range | 50° to 80° F |
| Applicable Surface Material | Cement/Concrete, Drywall, Glass/Ceramics, Masonry, Metal, Plaster, Plastic, Wood |
| Maximum Coverage Area | 400 to 450 sq ft |
| Cure/Dry-Time Range | 30 min (Touch), 1 h (Handle/Recoat), 7 days (Full Cure) |
| Age Recommendation | Ages 16 and Up |
| Product Biodegradability Indicator | N |
| Product Biodegradability in Days | 0 |
| Product Compostability Indicator | N |
| Compliance Standards | EPA Reg. No. 87469-1-69587 |
| Pre-Consumer Recycled Content Percent | 0% |
| Post-Consumer Recycled Content Percent | 0% |
| Total Recycled Content Percent | 0% |
| Disclaimer Statement | Do not apply when air or surface temperatures are below 50° F (10° C) or when drying conditions are poor. Not recommended for new or unpainted metal and vinyl siding or for floors, decks and other surfaces subjected to full-immersion and/or prolonged contact with water. For optimal protection, apply topcoat product within 72 hours. |
| Footnote 1 | Recommended Dry Film Thickness (DFT) Per Coat: 1 to 2 mil |
| Footnote 2 | Recommended Wet Film Thickness to Achieve DFT: 2.5 to 5 mil |
| UPC | 00020066237912 |
| Prop 65 | Cancer and Reproductive Harm -- www.P65Warnings.ca.gov |
Zinsser Mold Killing Primer is a protective, water-based coating that can be applied directly over existing mold, mildew and odor-causing bacteria. Featuring a proven, registered and approved antimicrobial-fungicidal agent, it not only covers over associated stains but also kills all pre-existing fungal organisms. Use it directly on nearly any dry, debris-free, non-porous, interior or exterior surface with minimal pre-cleaning in just about any residential, commercial or industrial environment: homes, offices buildings, retail establishments, schools, hospitals, factories and more. And though this primer is compatible with any topcoat product, it pairs perfectly with Zinsser PERMA-WHITE Mold & Mildew-Proof™ paints. To fully cover over and obscure heavy stains, particularly those caused by water leaks, a second primer coat with a tailored, stain-blocking product may be required. In such scenarios, BIN and Cover Stain primers are highly recommended.