3M™ Scotchkote Electrical Coating FD, 15 oz. can, 10/Case
3M™ Scotchkote Electrical Coating FD, 15 oz. can, 10/Case
3M™ Scotchkote Electrical Coating FD, 15 oz. can, 10/Case
SKU
#7100095977
Part #: 60151
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ Scotchkote™ Electrical Coating FD is a fast drying sealant that is designed to improve the weather resistance of taped splices.
3M Scotchkote Electrical Coating FD is a fast-drying liquid sealant that is designed to improve the weather resistance of taped splices. Compatible with Scotch Vinyl electrical tapes, this electrical coating is especially useful for sealing vinyl tape applications subjected to excessive amounts of oil. Provides good adhesion to wood, metal, rubber and plastic. Typical tack time is 12 minutes at 72F / 22C. Suitable for direct burial, direct water immersion or above ground applications.
Fast-drying electrical coating and sealant for joint sealing protection of vinyl tape applications
Compatible with Scotch® Vinyl electrical tapes. Ideal for applications subjected to excessive oil
Suitable for direct burial, direct water immersion or above ground applications
Good adhesion to wood, metal, rubber and plastic in addition to vinyl tape. Flexible when dry
Typical tack time is 12 minutes at 72F / 22C
Self-contained applicator; virtually no waste if container is resealed after use
For industrial/occupational use only. Not for consumer sale or use.