Toggle Nav

3M™ Scotchkote™ Fusion-Bonded Epoxy Rebar Coating 426, Long 65 lb Box, 65/Case

3M™ Scotchkote™ Fusion-Bonded Epoxy Rebar Coating 426, Long 65 lb Box, 65/Case

SKU
#7010320259
Part #: 46560
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.

For industrial/occupational use only. Not for consumer sale or use.


3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.


3M™ Scotchkote™ 426 Fusion-Bonded Epoxy Coating is a one-part, heat curable, thermosetting epoxy coating designed for improved corrosion protection for "after-fab" application. Scotchkote™ 426 is resistant to cathodic disbondment and corrosive agents such as deicing salts, airborne salt spray, sea water, harsh chemicals, acid rain, carbonation, contaminated aggregate, and concrete additives.
More Information
Specification(s)
Part number7010320259
UPC Code00051138465605
ApplicationTransportation: Highways and Bridges
Container Size (Imperial)65.0 lb
FamilyAfter Fab
FormPowder
Gel Time400 °F (204 °C) 13 sec - 20 sec
Product TypeReady to use
Ratio by VolumeReady to use
RoHS EU CommentsRoHS 2011/65/EU compliant without exemption
Country of OriginUSA
Unit of Use - Customary Net Weight1.0 LBS
Shipping Quantity65.0
Brand3M
no_image
Safety Data Sheets (PDF , 0B)

Scotchkote™ 426 Long is designed for use on a custom coating line as the product has a long gel and cure time. Post baking is required.


  • Provides superior resistance from disbondment without pretreatments
  • Superior for prefabricated steel reinforcement
  • Good corrosion protection, even under hot, wet, salty conditions
  • Easy visual inspection of reinforcement surfaces
  • Color coded for easy identification of prefabricated reinforcement
  • Consistent performance test results under all application conditions
  • Resistance to cathodic disbondment and hot-water immersion adhesion loss
  • Meets CAN/CSA-Z 245.20-M92 and British Gas GBE/ CW6 without pretreatment
  • Meets ASTM A 775/A 775M and AASHTO M 284, AASHTO M 254, and ASTM A 884, except flexibility
  • Meets ASTM A 934/A 934M