For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ Scotchcast™ Resin 265 is a 1 part, general purpose, epoxy based, rapid cure, powder resin. It is manufactured by a fusion blend process while ensuring that each particle of powder contains all the components necessary to effect a complete cure and attain stated performance properties. The 100% solid insulation offers enhanced adhesion, thermal and electrical properties.
3M™ Scotchcast™ Electrical Resin 265 has a low melt viscosity and minimum build that is ideal for a variety of coating, bonding and saturation applications. It is a widely used, well known, general purpose epoxy powder resin. The non flammable resin does not contain any solvents and does not require any mixing or catalyzation. This odor free resin can be applied by trickle, spray or dip processes, and is simply applied to the heated windings where it melts, flows into the wire interstices and cures. ASTM Approved and RoHS 2011/65/EU Compliant.
Solids insulation renders good adhesion, thermal and electrical properties
Has 60-second gel time at 379.4 °F (193 °C)
For a variety of coating, bonding and saturation applications
Withstands temperatures of 356 °F (180 °C)
Applied by trickle, spray or dip processes
Provides excellent electrical properties and thermal shock resistance