Commercial The MULE (Modified Urethane Latex Epoxy), Interior/Exterior, Gloss Glass White, 1 gal Bucket/Pail, 2/Carton
Commercial The MULE (Modified Urethane Latex Epoxy), Interior/Exterior, Gloss Glass White, 1 gal Bucket/Pail, 2/Carton
$174.00
/ CT
SKU
#RST375658
- Versatile, abrasion-resistant coating for walls, doors, trim, floors and more.
- Ideal for high traffic areas that are subject to routine cleaning and disinfection.
- Excellent adhesion qualities—compatible with a wide range of materials.
- Use it for interior and exterior sufaces.
- Low odor, water-based formula.
| Specification(s) | |
|---|---|
| Paint Sub-Category | Epoxy, Water-Based |
| Global Product Type | Building/Construction Paints & Primers |
| Intended Application Environment | Interior/Exterior |
| Finish/Sheen | Gloss |
| Color(s) | Glass White |
| Color Family | White |
| Number of Colors | 1 |
| Volume Capacity | 1 gal |
| Packaging Type | Bucket/Pail |
| Binder/Vehicle Ingredient(s) | Modified Urethane Latex Epoxy |
| Diluent/Solvent Ingredient(s) | Glycol Ether, Water |
| Application Method | Brush, Roller |
| Application Temperature Range | 50° to 90° F |
| Applicable Surface Material | Cement/Concrete, Drywall, Masonry, Metal, Plaster, Wood |
| Maximum Coverage Area | 155 to 330 sq ft |
| Cure/Dry-Time Range | 15 min (Touch), 45 min (Handle), 2 h (Recoat), 24 h (Light Foot Traffic), 3 days (Vehicle Traffic), 7 days (Full Cure) |
| Age Recommendation | Ages 16 and Up |
| Product Biodegradability Indicator | N |
| Product Biodegradability in Days | 0 |
| Product Compostability Indicator | N |
| Compliance Standards | USDA FSIS Regulatory Sanitation Performance Compliant, VOC Compliant |
| Pre-Consumer Recycled Content Percent | 0% |
| Post-Consumer Recycled Content Percent | 0% |
| Total Recycled Content Percent | 0% |
| Disclaimer Statement | For best results, apply within the recommended Application Temperature Range (50° to 90° F) when the surface temperature is also at least 5° F (3° C) above the dew point and the relative humidity is not greater than 85%. |
| Footnote 1 | Recommended Dry Film Thickness (DFT) Per Coat: 1.5 to 2.5 mil |
| Footnote 2 | Recommended Wet Film Thickness to Achieve DFT: 4 to 7 mil |
| UPC | 00020066008468 |
| Prop 65 | Cancer and Reproductive Harm -- www.P65Warnings.ca.gov |
The MULE is an easy to use, abrasion-resistant commercial coating designed specifically for high traffic areas that are subject to routine cleaning and disinfection: schools, healthcare facilities, offices, hospitality environments and more. Verstile Modified Urethane Latex Epoxy (MULE) features excellent adhesion qualities, allowing it to be applied on a wide range of both primed and previously painted materials, indoor and out. Use it on walls, doors, moldings, railings and even floors. Low-odor, water-based formula.