Toggle Nav

3M™ Cartridge Roll Mandrel, 45117, 3/16 in x 1 in x 1/4 in, 25 ea/Case

3M™ Cartridge Roll Mandrel, 45117, 3/16 in x 1 in x 1/4 in, 25 ea/Case

SKU
#7000148243
Part #: 45117
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.

For industrial/occupational use only. Not for consumer sale or use.


3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.


3M™ Cartridge Roll Mandrel is a tool attachment that holds an abrasive cartridge roll (sold separately). Together, the mandrel and cartridge roll enable the user to grind or finish hard-to-reach areas of a workpiece, such as angles and curves. The mandrel attaches to a rotary tool such as a die grinder or drill, and comes in different sizes to fit a variety of cartridge roll sizes.
More Information
Specification(s)
Part number45117
UPC Code00051144451173
Attachment TypeShaft
Equipment - MachinesDie Grinders
Form TypeCartridge Roll
Function/Attachment StyleMechanical Attachment
Max RPM24000.0 none
Overall Length (Imperial)3.0 in
Pilot Diameter0.18 in
Pilot Length1.0 in
Product TypeMandrel
Shank Size0.25 in
TypeRegular
Country of OriginPRC
Shipping Quantity25.0
Brand3M
The shank of the mandrel must match the size of the power tool collet or drill chuck, and the pilot diameter must be compatible with the size of the cartridge roll.

  • Shank of the mandrel is secured into the collet assembly or drill chuck of a rotary power tool
  • Mandrel enables access to tight spaces with a cartridge roll
  • Comes in various pilot diameters and lengths to fit different cartridge rolls
  • Shank must match the size of the power tool collet or drill chuck
  • Pilot diameter must match size of cartridge roll