Toggle Nav

3M™ Flange Adapter- 6 in Radial Bristle Brush Set, 2 in x 1 in, 25 ea/Case

3M™ Flange Adapter- 6 in Radial Bristle Brush Set, 2 in x 1 in, 25 ea/Case

SKU
#7000028515
Part #: 27628
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.

For industrial/occupational use only. Not for consumer sale or use.


3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.


3M™ Flange Adapter holds together a minimum of seven 6 inch radial bristle discs for use on bench motors with a shaft size of 1 inch diameter.
More Information
Specification(s)
Part number27628
UPC Code00048011276281
Attachment TypeShaft
Center Hole Diameter (Imperial)1.0 in
Color FamilyRed
Form TypeBristle
Net Weight (Imperial)0.08 lb
Overall Diameter (Imperial)2.0 in
Overall Height (Imperial)8.0 in
Overall Length (Imperial)0.25 in
Overall Width (Imperial)5.0 in
Product ColorMaroon
Product TypeAdapter
Country of OriginUSA
Shipping Quantity25.0
Brand3M
no_image
Safety Data Sheets (PDF , 0B)
For bench motors with shafts smaller than 1 inch, a 3M™ Telescoping Wheel Flange Adapter (Part No. 5) can be inserted into the center hole to fit 1/2 inch, 5/8 inch, 3/4 inch or 7/8 inch shafts. When a greater thickness of bristle discs is needed, 3M™ Spindle Extender Adapters (Part No. 30134) can be added to increase the disc capacity of the flange adapter. These additional adapters are sold separately.

  • Two-piece flange adapter holds a minimum of 7 bristle discs
  • 1 inch hole optimizes mounting of 6 inch bristle discs on bench motors with a 1 inch diameter shaft
  • 3M™ Telescoping Wheel Flange Adapter (Part No. 5, sold separately) can be inserted in the center hole to adapt to shaft sizes as small as 1/2 inch diameter
  • Can be used with one or more 3M™ Spindle Extender Adapters (Part No. 30134, sold separately) when additional layers of bristle discs are required