For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
The 3M™ E-A-R™ Push-Ins™ Earplugs have firm fitting stems to help with easier fitting — just hold the fitting stems to push the soft foam ear tips into the ear canals. No need to touch the ear tips, helping to keep the ear tips clean longer even if hands are dirty. One size fits most.
3M™ E-A-R™ Push-Ins™ Metal Detectable corded earplugs feature a push-to-fit design with a flexible stem to help keep the soft foam tip clean, even when hands are dirty. There is no need to roll the foam before fitting. Our earplugs are packaged in a poly bag to keep them clean prior to use. Recommended applications include assembly and mechanical, chipping, chiseling, cleaning, drilling, furnace operations, grinding, heavy equipment operations, machining, metal repair, painting, pouring/casting, power fastening, riveting, sanding, sawing and welding.
Not only is noise present in our daily routines and recreational activities, but millions of Americans work in hazardous noise on a daily basis. Estimates from the National Institutes of Health suggest that approximately 15 percent of Americans (26 million people) between the ages of 20 and 69 have high frequency hearing loss due to exposure to noise at work or during leisure activities. Hearing loss due to noise is almost entirely preventable by judicious use of hearing protection.
Noise reduction rating (NRR)*: 28 dB
Hold the flexible fitting stem to insert the ear tip and help keep it clean longer even when hands are dirty
Smooth surface of soft
E-A-Rform™ foam ear tip helps the ear tip slide into place for a comfortable fit
Compatible with the 3M™ E-A-Rfit™ Validation System
Available with or without cords to suit user preference
CSA Class AL
*U.S. EPA specifies the NRR as the measure of hearing protector noise reduction. However, 3M makes no warranties as to the suitability of the NRR for this purpose. 3M strongly recommends personal fit testing of hearing protectors. Research suggests that users may receive less noise reduction than indicated by the attenuation label value(s) on the packaging due to variation in fit, fitting skill, and motivation of the user. Refer to applicable regulations or guidance on how to adjust attenuation label values. It is recommended that the NRR be reduced by 50% to better estimate typical protection.
