3M™ Diamond Grade™ Conspicuity Markings 983-10, White, DOT, 2 in x 12 in, 100/Pack
3M™ Diamond Grade™ Conspicuity Markings 983-10, White, DOT, 2 in x 12 in, 100/Pack
3M™ Diamond Grade™ Conspicuity Markings 983-10, White, DOT, 2 in x 12 in, 100/Pack
SKU
#7010297023
Part #: 67638
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
For application to sides and rear of large trucks, trailers and other vehicles to increase their visibility, especially when the vehicle is turning or crossing roadways
Meets or exceeds all FMMVSS 108 requirements, including the DOT-C2 certification mark. Reflective at wide angles, to almost 90 degrees from perpendicular. Aggressive pressure sensitive adhesive. Easy to remove liner. Pre-sealed edges.
3M™ Diamond Grade™ Conspicuity Markings Series 983 is a highly reflective microprismatic lens sheeting