Scotch-Brite™ 96 Material Sheets, 2-3/4 in x 1-1/2 in, 500 ea/Case, SPR 017661A
Scotch-Brite™ 96 Material Sheets, 2-3/4 in x 1-1/2 in, 500 ea/Case, SPR 017661A
Scotch-Brite™ 96 Material Sheets, 2-3/4 in x 1-1/2 in, 500 ea/Case, SPR 017661A
SKU
#7010299324
Part #: 32647
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
Scotch-Brite™ Material Sheets 96 are used to create abrasive discs, belts and pads for general purpose scrubbing, cleaning, polishing and finishing. This durable material contains very fine aluminum oxide grain and is designed for faster action and prolonged utility over common green pads. Non-rusting and resilient, it works like steel wool without leaving metal slivers behind.
Scotch-Brite™ Material Sheets 96 are designed to take on a wide variety of light abrasive applications. They are most commonly converted into handheld pads for cleaning on common kitchen items, but can also be effective in metal surface preparation and finishing in disc or belt form. Fast-cutting abrasive grains are bonded to the waterproof nylon fibers using a resilient resin bond. These features combine to create an abrasive that is effective at removing surface irregularities and debris without scratching or damaging the surface.
Aluminum Oxide Abrasive
This material is filled with finely graded aluminum oxide, which is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges. This allows aluminum oxide abrasives to deliver consistent performance over a long lifespan. Due to its fast cut-rate, hardness, and strength, it is widely used for grinding and finishing applications. Aluminum oxide is suitable for use on a wide variety of materials and surfaces.
The Scotch-Brite™ Advantage
Scotch-Brite™ cleaning and finishing products are developed with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The nylon webbing materials are waterproof and load resistant and keep the abrasive minerals cutting with high performance by limiting clogging of the fibers, which also extends the life of the abrasive.
Sheet of material used to create abrasives for general purpose scrubbing, cleaning and more
Resin coated fibers deliver more forceful scrubbing action and extend product life
Very fine aluminum oxide abrasive increases cleaning capability without scratching surfaces
Nylon material is waterproof for use in wet applications
Open web design prevents loading and can be cleaned easily for long-lasting use
