Scotch-Brite™ EXL Unitized Mounted Point, A11 x 1/4 in 8S FIN, 5/Carton, 50 ea/Case
Scotch-Brite™ EXL Unitized Mounted Point, A11 x 1/4 in 8S FIN, 5/Carton, 50 ea/Case
Scotch-Brite™ EXL Unitized Mounted Point, A11 x 1/4 in 8S FIN, 5/Carton, 50 ea/Case
SKU
#7010365523
Part #: 64795
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
Scotch-Brite™ EXL Unitized Mounted Point lightly deburrs, blends and finishes metal and plastic parts. The versatile assortment of shapes and sizes make the EXL Unitized Mounted Point a good match for small parts with hard-to-reach areas.
Scotch-Brite™ EXL Unitized Mounted Point comes in a variety of ANSI (American National Standards Institute) shapes and sizes, ideal for light blending and deburring of smaller workpieces. The abrasive point is securely fastened to a metal spindle, so it can be used with a die grinder. The variety of abrasive sizes helps operators effectively finish various parts.
The EXL Unitized Mounted Point reduces the risk for smearing or blemishing the surface. It also features nonwoven web that is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the nylon fibers.
Unitized products are produced by compressing and curing multiple layers of abrasive material together. The tough, layered, unitized construction gives the abrasive higher density and more durability, making Scotch-Brite™ EXL Unitized Mounted Point an exceptional choice for small workpieces that require a consistent finish.
Mounted point is securely fastened to a metal spindle for safe use with die grinder
Abrasive lightly deburrs and finishes the workpiece without changing geometry
Resists smearing for cleaner surfaces and less preparation
Nonwoven construction resists loading during product use
Unitized production method compresses abrasive web for greater density and durability