Scotch® Rubber Splicing Tape 23, 2 in x 30 ft, Black, 1 roll/carton, 16 rolls/Case
Scotch® Rubber Splicing Tape 23, 2 in x 30 ft, Black, 1 roll/carton, 16 rolls/Case
Scotch® Rubber Splicing Tape 23, 2 in x 30 ft, Black, 1 roll/carton, 16 rolls/Case
SKU
#7000138512
Part #: 15033
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
Scotch® Tape 23 is a 30 mil, premium grade, highly conformable, rubber splicing tape. The self fusing tape has a special polyester liner, which will not stick to the tape upon unwind. It withstands temperatures up to 194 °F (90 °C).
Scotch® Rubber Splicing Tape 23 by 3M™ is used for primary insulation for cable splice and termination applications and is compatible with solid dielectric cable insulation. The premium-grade adhesive features a polyethylene liner backed by self-fusing Ethylene Propylene Rubber (EPR), making this splicing tape easy to unwind.
This thick adhesive is temperature rated to 194 °F (90 °C) with an emergency overload rating to 266 °F (130 °C). To use, stretch tape and apply in successive half-lapped layers. Continue this process throughout the entire application until the build-up produces a uniform winding.
This tape is halogen-free and has a shelf life of 5 years. For wire splicing and insulation, applications depend on Scotch® Rubber Splicing Tape 23.
Scotch® Rubber Splicing Tape 23 is RoHS and Prop 65 compliant and self-certified to ASTM D4388, Type III up to 69 kV.
CONFORMABLE: Made with highly conformable ethylene rubber (EPR)
PRIMARY INSULATION USE: Used for primary insulation for cable splice and termination applications up to 69kV (ASTM D4388, Type III)
COMPATIBLE: Compatible with solid dielectric cable insulation
HIGH HEAT USE: Operating temperature rated to 194 °F (90 °C) with an emergency overload rating to 266 °F (130 °C)
EASY TO HANDLE: Unwinds without sticking due to the polyethylene liner
COMPLIANCE: RoHS and Prop 65 Compliant, Self-certified to ASTM D4388, Type III up to 69 kV (test report available)
PRODUCT SPECS: Tape thickness is 30 +/- 3.0 mils (0.76 +/- 0.076 mm), minimum tensile strength is 250 psi (1.7 MPa), and minimum elongation 700%
COMPLIANCE INFORMATION: For more compliance information, visit www.3m.com/regs