3M™ Diamond Grade™ Fluorescent Work Zone Sheeting 3924S Fluorescent Orange, 12 in x 50 yd
3M™ Diamond Grade™ Fluorescent Work Zone Sheeting 3924S Fluorescent Orange, 12 in x 50 yd
3M™ Diamond Grade™ Fluorescent Work Zone Sheeting 3924S Fluorescent Orange, 12 in x 50 yd
SKU
#7000149429
Part #: 16784
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
Fluorescent orange microprismatic reflective sheeting with pressure sensitive adhesive for production of high quality work zone signs. Highly visible in daytime, twilight, inclement weather and at night.
3M™ Diamond Grade™ Fluorescent Work Zone Sheeting Series 3924S is highly visible at wide angles to approaching traffic and at long sight distances. Fluorescent orange is approved in the U.S. Manual on Uniform Traffic Control Devices for all construction/maintenance work zone signs and devices. 3924S sheeting has a distinctive seal pattern that is easily distinguished to assist work site inspection. May be applied to aluminum, medium and high density plywood, and reinforced plastic (FRP) substrates. See Product Bulletin 3924 for full details.
Highly visible at wide angles in daytime, twilight, inclement weather and at night
Pressure sensitive adhesive for ease of application
Impact and gouge resistant
May be applied to several different substrates
Meets ASTM D4956 Type VIII and ASTM D4956-07 Type VII, VIII and X