3M™ Self-Stick Liquid Protection Fabric, 36879, Blue, 28 in x 300 ft, 1 roll per case
3M™ Self-Stick Liquid Protection Fabric, 36879, Blue, 28 in x 300 ft, 1 roll per case
3M™ Self-Stick Liquid Protection Fabric, 36879, Blue, 28 in x 300 ft, 1 roll per case
SKU
#7100169496
Part #: 36879
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ Self-Stick Liquid Protection Fabric is ideal for a wide range of temporary surface protection in industrial settings. Its liquid-proof layer protects work surfaces from water, oils, solvents and more. Its nonwoven surface traps dirt, dust and debris and prevents them from spreading through the facilities, and provides light impact resistance, and a tough layer underneath resists even challenging industrial fluids. Its adhesive backing keeps it securely in place and removes without residue.
3M Self-Stick Liquid Protection Fabric is ideal for a wide range of temporary surface protection applications in both industrial and home settings. Its liquid-proof layer protects from water, oils, solvents, paints and more. The nonwoven surface traps dirt, dust and debris to prevent them from spreading through the facility. Low-tack adhesive backing keeps it securely in place and removes easily without residue. Resistant to light impact and abrasion for areas where scratches and dings are common. Use the 28 in x 300 ft roll with our floor or wall applicators for efficient application. 3M Self-Stick Liquid Protection Fabric is an extension of our Dirt Trap products, including 3M Dirt Trap Protection Material which collision repair professionals have been using in paint booths for years. It showcases how solid science can create a cleaner, more efficient facility.
Steps:
(1) Prep surface by removing debris, dirt and using residue-free cleaners. Before application, make sure surface is dry. (2) Tack down one end and unroll to desired length, without stretching. Avoid overlaps over 1 inch. (3) Change-outs should be every 2-4 weeks, depending on use. Peel back material away from itself, at a 135-degree angle.
3M™ Self-Stick Liquid Protection Fabric must not be used in any areas where explosive concentrations of ignitable materials could be present, as static discharge may occur. These include areas identified as ATEX Zones 0, 1, 2 and 20, 21, 22
Specially engineered surface protection material for industrial, marine and automotive applications
Temporarily protects surfaces from the damaging effects of liquids, oils and solvents while also trapping dirt
Adhesive backing keeps material secure and makes for fast, easy application
Resists UV rays – can be used outdoors for up to two weeks
Repositionable material applies quickly and removes easily without residue
Conformable material can be applied to irregular surfaces such as hoses and part stands
Has been shown to improve traction to help reduce the likelihood of slips and falls
