3M™ Electrical Moisture Block EMB-45R, 0.75 in X 100 ft X .045 in, mastic roll, black, 8 Rolls/Case
3M™ Electrical Moisture Block EMB-45R, 0.75 in X 100 ft X .045 in, mastic roll, black, 8 Rolls/Case
3M™ Electrical Moisture Block EMB-45R, 0.75 in X 100 ft X .045 in, mastic roll, black, 8 Rolls/Case
SKU
#7000058074
Part #: 09925
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ Electrical Moisture Block (EMB) is a is a specially formulated rubber adhesive/sealant for moisture proofing wire bundles. Resistant to salt water, corrosive chemicals and automotive fluids. Flexible over a wide temperature range. Easily installed. Flame retardant.
3M™ Electrical Moisture Block (EMB) is a self fusing, rubber based insulating adhesive/selaant designed to prevent the migration of water along harness wiring. EMB block is supplied on a release liner and offered in three standard sizes to accommodate different size wire bundles. It is compatible with typical wire insulation such as PVC, Hypalon(R) and crosslinked polyethylene.
Specially formulated rubber adhesive/sealant for moisture proofing wire bundles
Resistant to salt water, corrosive chemicals and automotive fluids
Flexible over a wide temperature range
Easily installed
Compatible with typical extruded wire insulation found in automotive and marine wiring such as PVC, synthetic rubber, and crosslinked polyethylene