Toggle Nav

3M™ Epoxy Film Electrical Tape Super 20, 15.5 in X 60 yd log trimmed, both sides, 1 Roll/Case

3M™ Epoxy Film Electrical Tape Super 20, 15.5 in X 60 yd log trimmed, both sides, 1 Roll/Case

SKU
#7000031666
Part #: 69208
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.

For industrial/occupational use only. Not for consumer sale or use.


3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.


3M™ Epoxy Film Electrical Tape Super 20 is a 5 mil thick, high dielectric electrical tape. This flame retardant tape is used as a coil cover, anchor, harnessing, banding, core, layer and crossover insulation. This tape is 600V rated and withstands a temperature range of 32 to 311 °F (0 to 155 °C).
More Information
Specification(s)
Part numberS20LOG 15.5"X60YD
UPC Code00051138692087
Adhesive TypeAcrylic
ApplicationInsulation
Backing (Carrier) MaterialEpoxy
Color FamilyWhite
Dielectric Strength8000.0 V
Electrolytic Corrosion Factor1.0
Elongation at Break120.0 %
Insulation Resistance1 x 10^6 megohms
Overall Length (Imperial)60.0 yd
Overall Width (Imperial)15.512 in
Product ColorCream
Shelf Life5.0 Year
Specifications MetUL Listed
Total Tape Thickness without Liner (Imperial)5.0 mil
Country of OriginUSA
Unit of Use - Customary Net Weight9.392 LBS
Shipping Quantity1.0
Brand3M

3M™ Epoxy Film Electrical Tape Super 20 is a flame-retardant tape ready to use for wrapping relays, coils, transformers, bobbin-wound sub-fractional horsepower shaded-pole motors, stick-wound and arbor wound coils and wire harnesses.

The tape's polyester film is coated on both sides with an epoxy resin coating that reinforces the tape for continuous use up to 155°C (311°F). This tape requires no heat, preparation or moisture before application.

The acrylic, pressure-sensitive adhesive helps make this electrical tape easy to apply, and it’s non-corrosive. The 5.2-mil (0.132 mm) thick tape is tough and conformable. It’s resistant to punctures, solder, heat, oxidation, solvents and oil.

Tape is UL510A Standard, Category OANZ2, File No. E17385, CSA Certified, Standard C22.2 No. 66, File No. 093411, Class 9052-30. For more details on regulatory compliance, visit www.3m.com/regs.

3M™ Epoxy Film Electrical Tape Super 20 has great electrical handling properties and is suitable for a variety of industrial and occupational needs.


  • VERSATILE: Used for wrapping relays, coils, transformers, bobbin-wound sub-fractional horsepower shaded-pole motors, stick-wound or arbor wound coils and wire harnesses
  • NO ADDITIONAL TOOLS NEEDED: No heat, moisture or other preparation is needed to apply adhesive
  • TEMPERATURE RANGE: Continuous operation not exceeding 155°C (311°F) per UL and CSA listings
  • COMPLIANCE: UL510A Standard, Category OANZ2, File No. E17385; CSA Certified, Standard C22.2 No. 66, File No. 093411, Class 9052-30
  • STABILITY: 5-year shelf life (from date of manufacture)
  • COMPLIANCE INFORMATION: For more compliance information, visit www.3m.com/regs