3M™ Low-Static Non-Silicone Polyimide Film Tape 7419, 25 in x 36 yds, 1 Roll/Case
3M™ Low-Static Non-Silicone Polyimide Film Tape 7419, 25 in x 36 yds, 1 Roll/Case
3M™ Low-Static Non-Silicone Polyimide Film Tape 7419, 25 in x 36 yds, 1 Roll/Case
SKU
#7010370732
Part #: 89746
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ Low Static, Non Silicone Polyimide Film Tape 7419 with DuPont™ Kapton® polyimide film and acrylic adhesive used for PCB solder masking and other high temperature applications. Low Static.
This high temperature tape utilizes a non-silicone adhesive formulation which eliminates concerns about silicone contamination on the masked areas. It also has designed in static dissipative performance attributes and produces very low static charge during unwind and removal making it desirable in static sensitive applications. 3M tape 7419 has been designed to remove cleanly from a variety of typical electronic substrates including FR-4, polyimide, gold, copper, and silicon after high temperature processing. Standard Lead Time: 15 Calendar Days
Specially formulated acrylic adhesive is resistant to typical solder mask temperatures for short periods of time. Stays firmly in place during processing and removes cleanly from typical electronic substrates even after 10 min @ 500 degree F (260 degree C).
Non-silicone adhesive formulation eliminates the potential for silicone contamination which can interfere with subsequent bonding or conformal coating operations.
The high temperature acrylic adhesive also has excellent chemical resistance and should be considered for demanding chemical masking applications.