3M™ Polyimide Film Electrical Tape 1205, Amber, Acrylic Adhesive, 1 mil film, 3/4 in x 36 yd (19,05 mm x 33 m), 12/Case
3M™ Polyimide Film Electrical Tape 1205, Amber, Acrylic Adhesive, 1 mil film, 3/4 in x 36 yd (19,05 mm x 33 m), 12/Case
3M™ Polyimide Film Electrical Tape 1205, Amber, Acrylic Adhesive, 1 mil film, 3/4 in x 36 yd (19,05 mm x 33 m), 12/Case
SKU
#7100035654
Part #: 27527
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
3M™ Polyimide Film Electrical Tape 1205 is a polyimide film backed electrical tape. This flame retardant tape is suitable for use in applications that require thin insulating material for wrapping transformers, capacitors and wire harnesses. This tape withstands a temperature range of 40 to 311 °F ( 40 to 155 °C) without the loss of electrical properties and tensile strength.
3M™ Polyimide Film Electrical Tape 1205 is an amber, UL listed tape, ideal for electrical tasks like printed circuit board assembly, and wrapping coils, capacitors, wire harnesses, transformers and anchoring leads.
This strong, 3.2-mil thick tape is flame-retardant and non-corrosive, thanks to its 1-mil polyimide film backing on one side, coated with an acrylic adhesive. This easy-to-use electrical tape features a pressure-sensitive adhesive that does not require heat, preparation or moisture before application. It's used for continuous operation not exceeding 155 °C (311 °F) per UL listing.
It is UL Component Recognized, UL510A Standard, Category OANZ2, File No. E17385. For more details on regulatory compliance, visit www.3m.com/regs.
When you need an electrical tape that offers consistent results in electrical applications, use 3M™ Polyimide Film Electrical Tape 1205.
Highly conformable with a pressure-sensitive, acrylic adhesive
Flame-retardant and has polyimide backing
Suitable for use as wave solder masking tape in a printed circuit board assembly
Designed for anchoring leads and terminal boards
Withstands a temperature rating of -40 to 311 °F (-40 to 155 °C)