3M™ Cushion-Mount™ Plus Plate Mounting Tape E1815H, Blue, 15 3/4 in x 25 yd, 15 mil, 1 roll per case
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1815H, Blue, 15 3/4 in x 25 yd, 15 mil, 1 roll per case
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1815H, Blue, 15 3/4 in x 25 yd, 15 mil, 1 roll per case
SKU
#7000049316
Call for Availability
For industrial/occupational use only. Not for consumer sale or use.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and
packaged for sale to trained industrial and occupational customers for
workplace use. Unless specifically stated otherwise on the applicable
product packaging or literature, these products are not intended,
labeled, or packaged for sale to or use by consumers (e.g., for home,
personal, primary or secondary school, recreational/sporting, or other
uses not described in the applicable product packaging or literature),
and must be selected and used in compliance with applicable health and
safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all
product literature, user instructions, warnings, and other limitations,
and the user must take any action required under any recall, field
action, or other product use notice. Misuse of 3M industrial and
occupational products may result in injury, sickness, death, or property
damage. For help with product selection and use, consult your on-site
safety professional, industrial hygienist, or other subject matter
expert.
Our 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1815H with easy mount adhesive is designed for mounting flexographic print plates to cylinders or sleeves. This blue foam mounting tape provides high quality firm combination print.
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1815H is a blue foam tape that provides high quality combination print. This is the firm tape for combination print. It has the air release feature that allows for bubble free mounting. This tape has excellent resistance to lifting on press allowing for clean plate removal.
Recommended Applications
Mounting photopolymer plates to flexographic printing cylinders and sleeves
Used in combination, process and solid printing processes
3M sticky back tapes are designed for narrow web presses to print tag and labels
3M flexographic plate mounting tapes are highly engineered to provide very tight caliper tolerance to allow printers to use tape from different manufacturing lots and keep tight print registration. The compressible foam will withstand long and high speed print runs.
This cushion tape is manufactured for 15 mil applications. It is constructed with engineered acrylic adhesives. The adhesive on the linered (plate) side of the tape is designed for mounting of photopolymer plates. The adhesive on the non-linered (sleeve/cylinder) side is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removal when demounting.
0.015 inch (0.38 mm) double coated foam tape has the air release feature with a plate side adhesive technology designed to resist edge lifting on flexographic print plates
Has a firm density foam that is ideal for printing combinations of solids and process with halftone dots
Blue foam color indicates the firm density foam
Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
Has higher plate side adhesion for challenging print conditions that use thick plates or small print sleeves
Print plates mounted on E1815H will have no air bubbles under the plate due to the air release feature designed into the tape
Grooves in the adhesive are created by a cross-hatch pattern from the release liner
Plate demounts from the double coated cushioned tape without adhesive residue
Tape also removes cleanly from the sleeve or steel print cylinder
Flexographic printing, flexographic printers
Cushioned flexographic plate mounting sticky back foam tape
